|
Product care and Maitenance
Metal Seatings
This product should be examined at least every thirty(30) days for signs of damage, structure failure or instability, missing, damaged or worn glides should be replaced, and cracked or broken welds should be repaired immediately to avoid instability. People should not rock backwards or stand on this chair.
Stackable chairs should not be dropped or slammed down when being unstacked.
Wood Seatings
Inspect critical structural components of chairs monthly including frame joints, screws, bolts, glides, legs and back supports.
Remove from service any chair with cracked legs or back supports or with excessive play in the frame structure. Tighten loose screws or bolts- taking care not to over tighten or strip out. Replace missing bolts or screws, using a size larger. if woods is split or hole is still too large, replace chair. Replace missing nail glides. Use a spot of epoxy glue if the leg end is worn. structural repairs should only be made by a knowledgeable professional.
Wood Finish
Coat wood with a hard paste wax every three(3) to four(4) months during the first year of use. After the first year, application can be less frequent. To clean: use a liquid clean-wax polish combination. Do not use abrasive cleaners. Do not expose to extreme temperature or moisture. Water spills on the surface should be wiped off immediately. To repair scratches, use a wax repair stick.
Polypropylene Shell
Clean with hot water and household detergent. For stubborn stains, use a soft brush with detergent, do not use abrasive cleaners.
Fiberglass Shell
Clean with hot water and household detergent. Apply a coat of automobile polish every three(3) months. Do not use abrasive cleaners.
Vinyl
Use a liquid detergent suitable for cleaning vinyl. After cleaning, wipe the surface with a cloth dampened with warm water.
Texture
Cleaning methods vary base on type of fabrics. Spills should be wiped off immediately with a cloth. Every overall cleaning, professional service is recommended. Fabrics with a protective coating should have it reapplied once a year. Wipe off spilled food from frames and upholstery as quickly as possible, using a damp close with mild soap solution if necessary. Do not use harsh detergent or chemical cleaners.
Warning
Product requiring adjustment, or showing any signs of structure failure or abuse, should be taken out of service immediately to prevent any potential injury.
Warnings and limitations on use of certain chairs or chair components are printed in applicable Pep furniture Price list and are made by reference a part of this catalog. Refer to price list for detail description.
We are continuously striving to improve the quality standards in our products, without changing the general appearance of same. Therefore, we reserve the right to make these changes without prior notice to the purchaser. Pep furniture reserves the right to add leg support stretchers, without compromising design intent, if deemed necessary.
The installation photographs contained in this catalog are illustrations of interior environment; however the products depicted in these interior may not all design or manufactured by Pep furniture.
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior permission of the copyright owner. Violators will be prosecuted to the full extent of the law.
|